Product Type: | Alloyed |
---|---|
Material: | Cemented Carbide |
Carbon Content: | Customized |
PCD: | 90.5 |
ET: | by Customers′ Requirement |
Hole: | by Customers′ Requirement |
Customization: |
---|
Suppliers with verified business licenses
Grade |
Density g/cm3 | Hardness HRA | T.R.S MP a |
Performance&application recomended | Approx Grades in China |
A |
13.5 |
83.5 |
3000 |
Good wear resistance and bending strength.It is often perferred by nut forming dies and hight impact-resistance dies. | |
YM11 |
14.4 |
88.5 |
2420 |
Forming or stamping dies for metal powders and nonmetal powders | YG11 |
YM15 |
14.0 |
87.0 |
3000 |
It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress. | YG15 |
YM20 |
13.5 |
85.5 |
2800 |
It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instruments,battery jars,small sized steel balls,screws,screw caps,etc. | YG20 |
ML32 | 13.9 | 85.0 | 2750 | It is suitable for impact-resistant forging dies. | YG16C |
ML35 |
13.7 |
84.0 |
2800 |
It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers. | YG18c |
ML40 | 13.5 | 83.0 | 2850 | It is suitable for wear resistance or impact resistance dies. | YG20C ZL40.2 |
ML50 | 13.3 | 82.0 | 2900 | It is suitable for nut forming dies and high impact-resistant dies. | YG22C ZL40.5 |
ML60 |
13.1 |
81.5 |
2950 |
It is suitable for stainless screw dies and semifinishing rollers. | YG25C ZL40B |
ML80 |
13.1 |
83.0 |
3200 |
It is suitable for screw cap forming dies with high strength(highest impact-resistant forging dies). | GT55 |
Other grades and sizes can be offered as per customers'requirements |
Suppliers with verified business licenses