| Type: | Cemented Carbide Dies |
|---|---|
| Material: | Tungsten Carbide |
| Shaping Mode: | Forging |
| Hole Type: | Round Mould |
| Surface Treatment: | Polish |
| Application: | Hardware |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Grade |
Density g/cm3 | Hardness HRA | T.R.S MP a |
Performance&application recomended | Approx Grades in China |
| A |
13.5 |
83.5 |
3000 |
Good wear resistance and bending strength.It is often perferred by nut forming dies and hight impact-resistance dies. | |
| YM11 |
14.4 |
88.5 |
2420 |
Forming or stamping dies for metal powders and nonmetal powders | YG11 |
| YM15 |
14.0 |
87.0 |
3000 |
It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress. | YG15 |
| YM20 |
13.5 |
85.5 |
2800 |
It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instruments,battery jars,small sized steel balls,screws,screw caps,etc. | YG20 |
| ML32 | 13.9 | 85.0 | 2750 | It is suitable for impact-resistant forging dies. | YG16C |
| ML35 |
13.7 |
84.0 |
2800 |
It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers. | YG18c |
| ML40 | 13.5 | 83.0 | 2850 | It is suitable for wear resistance or impact resistance dies. | YG20C ZL40.2 |
| ML50 | 13.3 | 82.0 | 2900 | It is suitable for nut forming dies and high impact-resistant dies. | YG22C ZL40.5 |
| ML60 |
13.1 |
81.5 |
2950 |
It is suitable for stainless screw dies and semifinishing rollers. | YG25C ZL40B |
| ML80 |
13.1 |
83.0 |
3200 |
It is suitable for screw cap forming dies with high strength(highest impact-resistant forging dies). | GT55 |
| Other grades and sizes can be offered as per customers'requirements | |||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}